Stamped concrete services in Apopka FL - a look you'll be happy keeping up
Plain gray slab or a faded stamped patio? We pour, stamp and seal a stone look in a pattern picked for the upkeep you want.

- Licensed and fully insured.
- Free quotes on site.
- Expect a reply within 1 business day.
What goes into stamped concrete, and what sets the price?
Stamped concrete is new flatwork, the flat jobs like patios, walks and pool decks, that's colored and pressed with a pattern while it's still soft, so your slab in Apopka looks like slate, brick or stone. We pour it, stamp it, let it harden, then seal it to bring out the color.
Most people who call Custom Apopka Concrete about stamping have a plain patio they're tired of or a stamped one that's lost its color, and they want to know what a better one will take. The price mostly moves with the size of the area, how fancy the pattern is, how many colors and borders you want, and which sealer goes on top. The schedule turns on the weather, because we don't pour or seal into rain, and on how long the slab has to cure before it's sealed. When I come out, the estimate spells out what's in it so you can see where your money goes.
How can you tell it's time for stamped concrete work?
Color looks washed out
If the reds and browns on your stamped patio have gone chalky, the sealer on top has usually worn thin and the sun is working on the color underneath. Leave it long enough and the surface starts holding dirt, so a fresh coat turns into a bigger cleanup first.
Water soaks in, stains stay
When a hose spray darkens the slab instead of beading up and running off, there's not much protection left on top. Oil, leaves and mildew then soak in, and a stain that's set in is a lot harder to get out than it would've been to keep out.
A plain slab you're done with
A gray patio or walk that's cracked, sinking or uneven is often the right time to go stamped, since you're paying for a new pour either way. Waiting usually means living with a tripping spot while the old slab keeps getting worse.
How we handle stamped concrete services
First we pick the pattern and color with you, and I'll be straight that the fancier designs ask for more care, so we land on one you'll be happy keeping up. Then we prep the ground, because nobody sees the base but it decides how the whole slab holds up, and it's the last place I'd cut to pay for a fancier pattern. We pour, work the color in and press the stamp mats into the surface while the concrete is still soft enough to take the texture. After it cures, which is the wait while it hardens, we seal it, and before that day we talk through sealer choices so you know what resealing looks like down the road.
Stamping often comes up while we're planning other work around the house. If the walk to your front door is tired, concrete sidewalk building lets us run a new path that matches or borders the patio, and if the garage slab is in rough shape, we can pour new garage floor concrete as part of the same project so you're dealing with one crew.
One pattern, one color
This suits a back patio or side walk where you want the stone look without a lot of upkeep, because a single pattern and color costs less and is easier to keep looking right. It's where I steer most people who'd rather enjoy the patio than tend it.
Multiple colors, borders and inlays
This suits a front entry or pool deck that people see first, since extra colors, a border or a custom inlay can add curb appeal and help at resale. Plan on more care to keep it sharp, because every added color is one more thing that can fade.
Get a stamped concrete estimate for your patio, walk or deck
We'll reply within one business day to set a time. I'll come out, measure and give you a free quote on site that spells out what the price covers, and it's obligation-free.
(407) 358-0192- Based in
- Apopka, FL 32712
- Hours
- Mon–Fri: 6 AM–11 PM, Sat–Sun: 8 AM–9 PM
What happens after you call us about stamped concrete in Apopka?
Here's how a stamped job runs from your first call to the final walkthrough, so you know who you'll talk to and what you'll get along the way.
- +01
Call or send a message
Tell us the rough size of the area and the look you're after, and we'll set a time to come out. A photo of the spot helps me come prepared.
- +02
I measure and ask questions
I come out myself, look at the spot, measure and ask plenty of questions about how you use the space. The estimate spells out the pattern, color, sealer and prep that are in the price, so you can see exactly what you're paying for.
- +03
We prep, pour and seal
Once you say go and the permit question is sorted, our crew preps the ground, pours and stamps, then seals after the slab has cured. Rain can push a pour or a sealing day, and we'll tell you when it does.
- +04
Walk the finished job together
We walk the job with you, show you how the sealer looks wet and dry, and go over when you can start using it. You'll leave knowing what resealing will look like and when to think about it.
Why Apopka homeowners call Custom Apopka Concrete for stamped work
On a stamped job, what matters most is picking a look you'll actually keep up, and every job is backed by our satisfaction guarantee. Tell us about your project and I'll come take a look.
The owner comes out first
I usually come out myself to look at the job and talk it through, and our own crew does the work. You explain your patio once, to the person who answers for how it turns out.
Pouring flatwork since 2021
We've been in business since 2021, based in Apopka, and flatwork like driveways, patios and slabs is what we're known for. That's why the ground prep gets real attention here, not just the pattern on top.
Licensed and fully insured
We're licensed and fully insured. You're not taking on the risk of an uninsured crew working at your house.
Stamped patios, walks and permits around Apopka
Building permits inside the city come from the City of Apopka, and you can apply through its online permitting portal. The city also asks people to contact its Building-Safety Department or Building Official before starting a project. Whether your stamped patio or walk needs a permit is something we find out for your address, so before we start we check with the city or county building office that covers you. When a permit is needed, we file it as the licensed contractor and keep you posted along the way.
We're based in Apopka and work in the cities around it across the Orlando area, where the warm, humid weather and frequent rain shape how decorative concrete goes in and which materials make sense, and they can add to the cost. Sealer goes on best when the slab will be cooling for three to four hours afterward and stays out of hard sun, so on summer jobs we sometimes seal in the evening, and we plan around the same afternoon storms on jobs in Ocoee and Winter Garden.
Questions about stamped concrete in Apopka
How much does stamped concrete cost in the Orlando area?
Stamped concrete in the Orlando area usually costs about $9 to $30 per square foot. The low end is a single pattern and color, the high end adds more colors, borders and custom inlays, and the area's humidity and rain can push the total up. That's the market's range, not our price, and the estimate I write for your job spells out what's in yours.
What's the best sealer for stamped concrete in Florida?
A film-forming sealer, which coats the surface, is the most common choice on stamped concrete because it brings out the color. A penetrating sealer soaks in instead and shows less color, but it goes longer between coats. We go over both on your job so the look and the upkeep suit you.
How do I know when my stamped concrete needs resealing?
Reseal when the surface stops shedding water, starts taking stains or loses its color depth, rather than on a set schedule. Coats you don't need build up and are costly to remove. As a rough guide, one sealer maker says film sealers need recoating every 18 to 24 months and penetrating sealers last three to five years.
How long does new stamped concrete need to cure before it's sealed?
New stamped concrete has to cure, or harden, fully or to a certain point before it's sealed, and the industry standard for a full cure is 28 days. The time actually needed varies with the location, the time of year and the sealer, so it's fair to ask any crew which sealer they'll use and how long they'll let the slab cure first.
How soon can you walk on stamped concrete after it's sealed?
One sealer maker advises waiting 24 hours before light foot traffic and the full 72 hours before dragging furniture across it. It adds a few extra hours when the humidity is high, which covers plenty of days around Apopka.
Is stamped concrete slippery around a pool in Apopka?
It can be, because a film sealer can get slick when it's wet. One sealer maker advises adding grit while the first coat is still tacky to give your feet some grip, so that's a choice to settle before the sealer goes on, especially on a pool deck or a shaded walk.
Other concrete work that pairs with stamping
A new walk from the driveway to your door can carry the same pattern or a matching border, so the front of the house looks like one job.
If the garage slab is cracked, sinking or uneven, a fresh floor is easier to sweep, safer to walk on and better for parking and storage.
Cities we work in around Apopka
Custom Apopka Concrete is based in Apopka, Florida, and works in the cities around it across the Orlando area, from Ocoee to Mount Dora. These 12 cities have their own pages, and they aren't the only places we go.
Call to plan your stamped concrete
Have the rough size of the area and a photo of a look you like ready, and we can start narrowing down patterns on that first call.
Apopka, FL
