Garage floor concrete in Apopka FL - a slab built on packed, solid ground
Cracked, sunken or uneven garage floor? We pack the base right and pour a new slab that's ready for your car again.
- Licensed and fully insured.
- Free quotes on site.
- Expect a reply within 1 business day.
What goes into a new garage floor in Apopka?
Garage floor concrete is the slab your car, tools and storage sit on. Custom Apopka Concrete builds garage floors in Apopka on ground we dig out and pack first, so the floor stays put instead of settling with the dirt.
Most people call me when the old floor has cracked, sunk by the door or started holding water, or when they're building a garage and need a floor in it. The price mostly turns on the size, how much work the ground underneath needs, whether we put steel in it and whether you want a stain or stamp on top. The schedule turns on the permit question, the weather and the curing wait, the days fresh concrete needs to harden before it takes weight. Your estimate spells out what's in the price, so you know what you're paying for before anything gets poured.
How can you tell your garage floor needs replacing?
Cracks with uneven edges
A thin hairline crack is common in an older floor, but when one side sits higher than the other, the ground under the slab has moved. Waiting lets that edge catch tires and lets water in, which softens more of the base.
A sunken spot by the door
A dip at the door or along one wall usually means the base was raked flat instead of dug out and packed, so it sank as the dirt did. The low spot holds water, and the settling tends to keep going.
Water running toward the house
If rain off the driveway pools on the floor or runs back toward the inside wall, the slab was set with the wrong fall. Left alone, that water keeps working at the base and at the wall it meets.
How we do garage floor concrete
I start by checking where your water runs, because a garage floor should fall slightly toward the door, not toward the house. Then we dig out the soft soil and pack the subgrade, the ground the slab sits on, until it's firm, set the forms, lay rebar, the steel grid that holds a slab together, if you've chosen it, and pour. Our crew finishes the top, cuts control joints, shallow grooves that give the concrete a planned place to crack, and lets the slab cure. Your garage is out of use for a bit after the pour, so we plan the timing with you and tell you when it's fine to walk on and when it's fine to park. If the budget gets tight, I'll tell you to save on the finish before the base, because nobody sees the base on day one but it decides whether that floor stays flat.
If you want a stain or a stamp, we price that as its own line so you can see what the plain floor costs first, and our decorative concrete work covers those looks. On a lot that slopes, the ground beside the garage or the driveway sometimes needs holding back, and that's where concrete retaining walls come into the job.
Reinforced slab with rebar
This suits a garage that holds a truck, a workshop or heavy shelving, because the steel keeps cracks tight and the slab in one piece. It costs more than a plain slab, and I'll tell you honestly whether your use calls for it.
Plain slab with a broom finish
This suits a garage with lighter use on well-packed ground, and it keeps the price down. The broom finish is a light texture brushed into the wet top so tires and shoes get some grip when the floor is wet.
Get a free on-site estimate for your garage floor
Send the form and we'll reply within one business day to set a time. I come out, measure and talk it through, then you get a free estimate that spells out what the price covers, with no obligation.
(407) 358-0192- Based in
- Apopka, FL 32712
- Hours
- Mon–Fri: 6 AM–11 PM, Sat–Sun: 8 AM–9 PM
What happens after you call about a garage floor in Apopka?
Here's how a garage floor job runs from your first call to the day you can park inside again.
- +01
Call or send a message
You call or send us a message, and we get back to you to set a time for me to come out. A rough size of the garage helps us plan that visit.
- +02
I measure and ask questions
I look at the spot, measure, check where the water runs and ask how you use the garage. The estimate spells out what's in the price, so you can see what the base, any steel and any finish each add.
- +03
We prep the ground and pour
Once you say go, we sort out the permit question, then prep the ground and pour. We keep you posted as the pour day firms up so you can plan around it.
- +04
We walk the finished floor
We walk through the finished floor together so you can see the joints, the finish and the fall toward the door. The job is backed by our satisfaction guarantee.
Why Apopka homeowners call Custom Apopka Concrete for garage floors
Tell me about your garage and I'll come out to see it. Send us a message or call (407) 358-0192.
The owner looks at your job
I usually come out myself to look at the garage and talk it through, and our own crew does the work. You get your answers from the person running the job, not from someone passing your notes along.
Pouring flatwork since 2021
I taught myself concrete on my own house, learned the rest on other crews and started this business in Apopka in 2021. That's five years of driveways, patios and slabs where the ground prep gets real attention.
Licensed and fully insured
Apopka requires every contractor to register with the city, with a current state license or registration and an Orange County competency license for the type of work. You can look up any contractor's state license on the state license lookup, and we're glad to have you check us.
Garage floors and the work around them in Apopka
Apopka requires a building permit to build, enlarge, alter, repair, remove or demolish a structure, and garages are named on the city's list, so a new garage floor brings the permit question into the job. That list doesn't settle every floor by itself, so before we start, we check with the city or county building office that covers your address. When a permit is needed, we file it as the licensed contractor and keep you posted along the way. We're based in Apopka and work in the cities around it across the Orlando area.
On jobs here we mostly meet sandy ground and hard summer rain, so I watch where the water goes off the driveway and pack the base firmer than the dirt looks like it needs. We see the same ground on jobs in Ocoee and Winter Garden.
Questions about garage floor concrete in Apopka
How much does a garage floor slab cost in the Orlando area?
A concrete slab in the Orlando area usually costs about $4 to $11 per square foot, and that's the general range for slabs, not our price or a garage-only figure. A reinforced slab costs more per square foot than a plain one, and staining or stamping sits outside that range. We price your floor on site after I've seen the ground.
How long does a new garage floor take before I can walk or park on it?
You can usually walk on a new garage floor within 48 hours, and waiting a week before you park on it is the safe plan. Concrete takes about a month to fully cure, so plan to park in the driveway or on the street that first week.
What happens if I skip a permit for garage work in Apopka?
The city says owners who skip a permit can face fines or work stoppages from its building official or inspectors. It also warns of complications later when you sell or refinance, which is why we check before we start.
Is some cracking normal in a new garage floor slab?
Yes, some cracking is normal, and concrete slab design guidance says owners should be told to expect some on every job. A crack by itself isn't proof of bad work, and the control joints we cut give most of it a planned place to go. A web of short surface cracks can show up while a fresh slab is being finished, so it's fair to ask any crew how it guards against that on pour day.
How thick should a garage floor slab be?
Home floor slabs in the Orlando area usually run four to six inches thick, and garage slabs sit at the thicker end because they carry cars. We'll talk through thickness and steel at the estimate, based on what you park and store.
What is the best way to pour a garage floor in Florida summer heat?
The best way is to plan for the heat before pour day, because hot weather problems with fresh concrete can happen any time of year but usually show up in summer. An Illinois concrete group's hot weather guide calls for curing right after the pour, with a curing compound, soaking, a wet cover or curing paper. Ask any crew up front how it handles the heat, and we'll walk you through our plan for your floor.
Related services for your garage and lot
Want more than plain gray? Color and pattern can turn a garage floor into part of a workshop or game room, and we'll walk you through the options.
When your garage sits on a slope, a wall holds the soil beside the slab or driveway in place so it doesn't wash out under the concrete.
Service areas for garage floor concrete
Custom Apopka Concrete is based in Apopka, Florida, and pours garage floors across the Orlando area. Twelve cities have their own page here, including Orlando and Altamonte Springs, and we work in the cities around them too.
Call about your new garage floor
Have the garage's size in square feet, whether there's a floor there now and your address handy, so your first call covers what I need to plan the visit.
Apopka, FL